Shimadzu EI-D1003M, Instruction Manual

Page: 66 / 123

6.6 Software Operation
53
Power Supply Unit
INSTRUCTION MANUAL
6
(Note 1) See APPENDIX-A "COMMUNICATIONS" for details.
Mode Operation and LCD Display Description of Display
RS-232C
SETTINGS Baud rate setting
Event Transmission Settings (Note 1)
The event sending function is enabled
or disabled.
If set to ON, an event command is sent
from the power supply unit when an
event occurs.
RS-485
SETTINGS Baud rate setting
Multi-drop setting (Note 1)
Set ON to select the multi-drop mode.
Network ID setting (Note 1)
Setting required in multi-drop mode.
Event Transmission Settings (Note 1)
The event sending function is enabled
or disabled.
If set to ON, an event command is sent
from the power supply unit when an
event occurs.
SELECT
SET
SETTINGS
RS232C
BAUD RATE=9600bps
(9600bps) RS232C
BAUD RATE=9600bps
SELECT
SET
SET
EVENT SENDING=ON
(ON) RS232C
EVENT SENDING=ON
SELECT
SET
+ -
BAUD RATE=9600bps
(9600bps)
Press the + or -
key to select a baud
rate between 19.2k, 9600,
Previous Setting
4800, 2400, or 1200.
EVENT SENDING=ON
(ON)
Press the + or -
key to select between
ON or OFF.
Previous Setting
RS485
MULTIDROP=OFF
+ -
RS485
METWORK ID=01
+ -
SET
SELECT
SETTINGS
RS485
BAUD RATE=9600bps
(9600bps)
RS485
BAUD RATE=9600bps
SELECT
SET
SET
SET
MULTIDROP=OFF
(OFF)
SELECT
SET
NETWORK ID=01
(01)
SELECT
SET
SET
EVENT SENDING=ON
(ON)
RS485
EVENT SENDING=ON
SELECT
SET
+ -
BAUD RATE=9600bps
(9600bps)
Press the + or -
key to select a baud
rate between 19.2k, 9600,
Previous Setting
4800, 2400, or 1200.
MALTIDROP=OFF
(OFF)
Press the + or -
key to select between
ON or OFF.
Previous Setting
NETWORK ID=01
(01)
Press the + or -
key to select a value
between 01 and 32.
Previous Setting
EVENT SENDING=ON
(ON)
Press the + or -
key to select between
ON or OFF.
Previous Setting