RETURN/SEARCH button
PROG. SEARCH
PROG. SEARCH
R E W ,
PROGRAM SEARCH
Program Search mode automatically returns the tape
to the beginning of a number of previously recorded
scenes A total of 10 different scenes can be found
on one tape
Set the Operate switch to VCR
Press the RETURN/SEARCH button.
l
The
or “FF” indicator starts flashing on
the monitor.
To cancel, press the RETURN/SEARCH button
again.
Press the REW or FF button
l
The tape rewinds or fast forwards to the
beginning of a recording.
Playback starts automatically when the
beginning of the recording is found. The
indicators on the monitor automatically go off
after about 10 seconds.
To rewind the tape to the beginning of the
previous recording, press the REW button again
while the indicators are on.
Example:
To rewind the tape to the beginning of five different recordings
Monitor display
Tape position
(First recording)
(Last recording)
Notes:
l
Program Search
when the video cassette
IS
stopped or
playback.
l
Returns the tape to the Immediately
recording
the immediately previous recording is not
possible
l
In steps 2 and 4, if the tape
IS
at a point ahead of the
most recent
the
indicator will flash and
the “FF” indicator will not appear.
l
In steps 2 and 4, the tape is at a
before the most
recent recording, the “FF” indicator will flash and the
Indicator will not appear.
l
Does not function with recordings that are shorter than 10
seconds.
. If the video cassette was removed after the recordings
were made, Program Search does not function
32
