MODE DISPLAY button
QUICK RETURN
When you have been playing back what you have
recorded, and wish to quickly return to the end of
the last recorded scene, use the quick-return
function.
Set the Operate switch to CAMERA.
Press the RETURN/SEARCH button.
l
The tape begins winding or rewinding to the
end of the last recorded scene.
When the tape reaches the end of the last
recorded scene, the
enters Recording
Standby mode.
Note:
The Quick Return will not function if the video cassette
has been removed since the last recording, or if no
recording has been made since the video cassette was
loaded.
EDIT SEARCH
This
lets you search, without switching
from Camera Recording mode to VCR mode, for the
point on the tape where you wish to start recording
next.
In Recording Standby mode, make sure that the
auto/manual indicators or other operation
indicators are not displayed on the monitor.
(If they are displayed on the monitor, turn them
off by pressing the MODE DISPLAY button.)
Hold down the Edit Search
button
or Edit
Search
button
for more than one second.
When you find the point where you want to
recording, release the button.
Notes:
l
Some picture
appears during reverse edit search.
l
Forward
search is performed at the same speed as
normal playback, and reverse edit search at three times
the normal playback speed.
26
