Sharp UX-D1200SE Operation Manual Download Page 70

Page: 70 / 104

Secure Receive

Deactivating Secure Receive

If you need to deactivate Secure
Receive (faxes will be automatically
printed when received), follow the steps
below.

Press ,

then

until

[

ACTIVATE SECURE RCV.

]

appears.

Press

to select “NO”.

Enter the 4-digit secure code.

Press .

•

The display will briefly show [

SELECTED

] and then the date and

time.

•

If the wrong code is entered,
[

WRONG SECURE #

] will appear.

Go back to Step 4.

SECURE

Clearing the secure code

To clear the secure code, follow the
steps below.

•

Secure Receive must be deactivated
before you can clear the secure
code.

Press

, then

until

[

SECURE # CLEAR

]

appears.

Press

Enter the 4-digit secure code.

Press .

•

The display will briefly show
[

CLEARED

] and then the date and

time.

•

If the wrong code is entered,
[

WRONG SECURE #

] will appear.

Go back to Step 3.

SECURE

Summary of Contents for UX-D1200SE









































































































Search results

Summary of Contents for UX-D1200SE

Reviews:

Related manuals for UX-D1200SE

Brands by name

Popular brands

Sharp UX-D1200SE, Operation Manual

Search results

Summary of Contents for UX-D1200SE

Reviews:

Related manuals for UX-D1200SE

Brands by name

Popular brands