Register Handset Settings
35
2. Cordless
Handset
Programming a system PIN
The system PIN is a 4-digit ID number
that is used to prevent unauthorized
registration of a cordless handset in the
machine. When the system PIN is set to
a number other than 0000 (the initial
factory setting), a cordless handset
must be registered using the personal
registration procedure and the correct
system PIN must be entered on the
cordless handset during registration.
Follow these steps to program a system
PIN in the machine.
1
Press ,
then
until
[
REGISTER HS SETTING
] appears
.
2
Press
, then
until
[
SYSTEM
PIN
] appears.
3
Press .
4
Enter the current system PIN (4
digits).
•
The system PIN is initially set to
0000 at the factory.
5
Press .
6
Enter the new system PIN that you
wish to use (4 digits).
7
Press .
8
Enter the new system PIN once
again for confirmation.
9
Press .
10
Press
to
exit.
MENU
STOP
Registering a cordless handset
(personal registration)
Use this procedure to register a
cordless handset in the following cases:
♦
The system PIN has been changed to
a number other than “0000”.
♦
You are registering the handset in
multiple bases.
♦
You want to choose the number that is
assigned to the cordless handset.
♦
You want to assign a name to the
base (the machine). This name
appears when you press the OK key
in the standby screen.
On the cordless handset
1
Press or until “SETTINGS”
appears and press
OK
.
2
Press or to select “ADVANCED
SET.” and press
(
Valid.
).
3
Press or to select “SET
HANDSET” and press
(
Valid.
).
4
Select “PERSON. REGISTR” and
press
(
Valid.
).
5
Enter the number (1 to 4) that you
would like to assign to the machine
and press
(
Valid.
).
•
This number is used to identify the
machine when the cordless handset
is registered in multiple bases.
