manualshive.com logo in svg

Sharp MX-M550N, Service Manual, Page: 322 / 412

Share
Download
Sharp MX-M550N Service Manual Download Page 322

MX-M700N  PAPER TRANSPORT SECTION  G – 13

5)

Remove the E-ring, and remove the gear and the belt pulley.

6)

Remove the transport roller 2 (Drive) unit.

7)

Remove the E-ring from the transport roller 2 (Drive).

f. Paper feed tray 2 paper pass detector 1

g. Paper feed tray 2 paper pass detector 2

1)

Remove the relay pass unit. (See “(1) Relay pass unit”)

2)

Check the paper feed tray 2 paper pass detector 1 (A) and the
paper feed tray 2 paper pass detector 2 (B).

(2)

No. 5 paper feed relay unit

1)

Remove the multi manual paper feed unit. 
(See “A-(1) Multi manual paper feed tray unit” in the “MANUAL
PAPER FEED SECTION”)

2)

Remove the manual interface paper guide upper.

3)

Remove the manual feed relay paper guide upper.

4)

Lift the No. 5 paper feed relay unit, and remove the connector.

5)

Remove the No. 5 paper feed relay unit.

a. Manual paper pass detector 2

b. No. 5 paper feed relay detector

1)

Remove the multi manual paper feed unit. 
(See “A-(1) Multi manual paper feed tray unit” in the “MANUAL
PAPER FEED SECTION”)

2)

Remove the No. 5 paper feed relay unit. 

3)

Check the manual paper pass detector 2 (A) and the No. 5
paper feed relay detector (B).

A

B

B

A

Summary of Contents for MX-M550N





























































































































































































































































































































































































































Reviews:

No comments