Sharp MX-M550N Service Manual Download Page 242

Page: 242 / 412

MX-M700N OTHERS 12 – 7

Mail send counter

32bit

—

Accumulated number of mail send
• The number of send mails of

i FAX, E-mail, and FTP is
counted.

• Even in the serial system, one

scan is counted. (The number of
receivers is not counted.)

• The number of mails reached to

the server is counted.

• Since server data are deleted in

case of send cancel or a network
error, count is not made.

• Saved in the FAX-SRAM.

FTP send counter

32bit

—

Accumulated number of FTP send
• The page number of FTP

(DESK) send is counted.

• Even in the serial transmit

operation, the page number of
one scan is counted.
(The number of receivers is
notcounted.)

• The number of mails reached to

the server is counted.

• In case of send cancel or a

network error, the server data
cannot be deleted. Therefore,
count is made.

• Saved in the FAX-SRAM.

I-FAX original
(Scan page number
counter)

32bit

—

Accumulated page number of
internet FAX scan
• A communication error (except

for document jam) is counted.

• Cancel and CE error are not

counted.

• A send (Transfer, F code relay

broadcast) without document
scan is not counted.

• Saved in the FAX-SRAM.

I-FAX send
(Send counter)

32bit

—

Accumulated number of internet
FAX send
• A send error is counted.
• Resend is not counted.
• Cancel and CE error are not

counted.

• Saved in the 32bit counter and

the FAX-SRAM.

I-FAX receive
(Receive counter)

32bit

■

—

Accumulated number of internet
FAX send
• A normal mail receive is also

counted.

• Saved in the 32bit counter and

the FAX-SRAM.

I-FAX output
(Print page number counter)

32bit

—

Accumulated page number of
internet FAX receive print Count by
size and count in reprint after a jam
are the same as the copier
specifications.

SCAN TO HDD
(Save page number
counter)

32bit

—

Page number of SCAN TO HDD
save
• The page number of documents

saved to HDD is counted.

Simulation

Code

Operation content

Data

size

Data location

Conforming count

mode (Sim26-5)

Count-up condition

Main

Sub

MFP

control

PWB

FAX

Scanner

control

PWB

PCU

PWB

TOTAL

Mainte

nance

Summary of Contents for MX-M550N





























































































































































































































































































































































































































Search results

Summary of Contents for MX-M550N

Reviews:

Sharp MX-M550N, Service Manual, Page: 242 / 412

Search results

Summary of Contents for MX-M550N

Reviews: