Sharp MX-C607P User Manual Download Page 170

Page: 170 / 190

Lift the printer using the side and rear handles.

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 20 kg (44 lb), then it may

require two or more people to lift it safely.

Note:

If optional trays are already installed, then unlock them from the printer before lifting the printer. Do

not try to lift the printer and trays at the same time.

Align the printer with the optional tray, and then lower the printer until it

clicks

into place.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

If necessary, manually add the tray in the print driver to make it available for print jobs. For more information,
see

“Adding available options in the print driver” on page 175

Upgrading and migrating

170

Summary of Contents for MX-C607P































































































































































































Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands

Sharp MX-C607P, User Manual

Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands