Sharp MX-C607P User Manual Download Page 143

Page: 143 / 190

Action

Yes

Step 2

Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.

Note:

You can also change the settings on the printer control

panel. From the home screen, touch

Settings

Paper

Tray

Conﬁguration

Paper Size/Type

Make sure that the settings match the paper loaded.

Print the document.

Is the document printed on the correct paper?

The problem is
solved.

Go to step 3.

Step 3

Check if the trays are linked.

For more information, see

“Linking trays” on page 21

Print the document.

Is the document printed from the correct tray?

The problem is
solved.

Contact your

dealer

The printer is not responding

Action

Yes

Step 1

Check if the power cord is connected to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or

electrical shock, connect the power cord to an appropriately
rated and properly grounded electrical outlet that is near the
product and easily accessible.

Is the printer responding?

The problem is
solved.

Go to step 2.

Step 2

Check if the electrical outlet is turned off by a switch or breaker.

Is the electrical outlet turned off by a switch or breaker?

Turn on the switch or
reset the breaker.

Go to step 3.

Step 3

Check if the printer is on.

Is the printer on?

Go to step 4.

Turn on the printer.

Step 4

Check if the printer is in Sleep or Hibernate mode.

Is the printer in Sleep or Hibernate mode?

Press the power
button to wake the
printer.

Go to step 5.

Troubleshooting

143

Summary of Contents for MX-C607P































































































































































































Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands

Sharp MX-C607P, User Manual

Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands