Sharp MX-C607P User Manual Download Page 11

Page: 11 / 190

Using the control panel

Use the

Display

•

View the printer messages and supply status.

•

Set up and operate the printer.

Home button

Go to the home screen.

Keypad

Enter numbers or symbols in an input ﬁeld.

Power button

•

Turn on or turn off the printer.

Note:

To turn off the printer, press and hold the power button for ﬁve

seconds.

•

Set the printer to Sleep or Hibernate mode.

•

Wake the printer from Sleep or Hibernate mode.

Stop or Cancel button

Stop the current job.

Indicator light

Check the status of the printer.

Volume buttons

Adjust the volume of the headset or speaker.

Headset or speaker port Attach a headset or speaker.

Backspace button

Move the cursor backward and delete a character in an input ﬁeld.

Understanding the status of the power button and
indicator light

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blue

The printer is ready or processing data.

Red

The printer requires user intervention.

Learning about the printer

Summary of Contents for MX-C607P































































































































































































Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands

Sharp MX-C607P, User Manual

Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands