Sharp MX-2300G, Quick Start Manual, Page: 38 / 88

36
Copying a large number of originals at once (Job Build)
Using two machines to copy a large number of
originals (Tandem Copy)
Using a different paper type for covers (Covers/Inserts)
Adding inserts when copying on transparency film
(Transparency Inserts)
The maximum number of originals that
can be fed through the automatic
document feeder at once is 100 sheets.
If you need to copy more than 100 originals as
a single job, the job build function lets you
divide the originals into sets and feed each set.
(An automatic document feeder must
be installed.)
You can divide a copy job between two
machines connected to the same
network.
This saves considerable time when
running a large copy job.
To use this function, the tandem
connection setting must be configured
in the system settings.
This function enables you to use a
different type of paper for the front and
back covers of a set of copies.
A different type of paper can also be
added as an insert at specified pages.
(An automatic document feeder must
be installed.)
When copying onto transparency film,
this function inserts sheets of paper
between the sheets of transparency film
to keep them from sticking together.
100
200
100
4 sets
2 sets
2 sets
Back co
ver
Cover
Inser
t
Inser
t
Paper inser
t
Paper inser
t
Paper inser
t
02‑1̲Quick(Copy).fm 36 ページ ２００５年１０月１３日 木曜日 午後９時５５分