Sharp DX-B350P Page 112 User Manual Download

Page: 112 / 146

9-2

User’s Guide

Poor Print Quality

Troubleshooting

Poor Print Quality

Paper Is Output Blank or All Black

Printout Is Faded, Stained, Missing, Wrinkled, or Blurred

Status

Items to check

Action

Nothing is printed.

Is the seal of the Toner Cartridge pulled out?

Pull out the seal.

Are two or more sheets of paper fed
simultaneously?

Remove and fan the papers well. Then load
them again.

Is the Toner Cartridge defective or damaged?

Replace it with a new Toner Cartridge.

Is the Toner Cartridge correctly set?

Reset the Toner Cartridge correctly.

Printer may have malfunctioned. Contact

Technical

Support.

The entire paper is printed
black.

Is the Toner Cartridge defective or damaged?

Replace it with a new Toner Cartridge.

Printer may have malfunctioned. Contact

Technical

Support.

Status

Items to check

Action

Printing is faded and
blurred.

Is the correct type of paper used?

Load the correct type of paper.

Is the paper damp?

Replace with paper from a new ream.

Is the Toner Cartridge defective or damaged?

Replace with a new Toner Cartridge.

Is it time to replace the Toner Cartridge?

Replace with a new Toner Cartridge.

Are the levers at both ends of the Fuser Unit
pushed up?

Push down the levers.

Summary of Contents for DX-B350P



















































































































































Search results

Summary of Contents for DX-B350P

Reviews:

Related manuals for DX-B350P

Brands by name

Popular brands

Sharp DX-B350P, User Manual

Search results

Summary of Contents for DX-B350P

Reviews:

Related manuals for DX-B350P

Brands by name

Popular brands