Sharp DX-B350P, User Manual

Page: 80 / 146

6-4 User’s Guide
Navigating the EWS
Embedded Web Server
File Management User Flash Directory of files in User Flash EWS only Feature
View the files located on the
Flash.
System Settings Total Count Image Counter
Toner Page Count
Fuser Counter
Usage Count See section “Understanding
Page Counters” on page 3-20
System Settings Default Settings Clock Adjust
Specify Time Zone
Date & Time Settings Set time and date parameters.
System Settings Paper Tray Settings Tray Linking
Tray Controls
Custom Size Unit Custom paper size units can
be inches or mm. Custom
paper size width and length
can be set. Note that you must
turn Auto-Sense off to set
custom sizes. Remember to
press the Submit button after
each action to gain access to
custom size settings.
System Settings Printer Condition
Settings TAB: Default Settings
Copies, Duplex, Duplex Bind, Default
Source, Manual Feed, Output Tray,
Output Linking, Blank Pages, Auto
Resize, Separator Page, Edge to Edge Common print settings such
as number of copies and input
and output trays.
System Settings Printer Condition
Settings TAB: PCL
Orientation, Font Source, Font Number,
Pitch, Symbol Set, Lines Per Page, CR
Mode, LF Mode, FF Mode, Print Area PCL settings.
System Settings Printer Condition
Settings TAB: PostScript 3
Print PS Errors PostScript 3 settings.
System Settings Operation Settings Display Language, Power Save, Wait
Timeout, Job Timeout, Jam Recovery,
Hex Print, Toner Low, Job Accounting A variety of printer
operational settings.
System Settings Device Control Resolution, Toner Saver, Print Density Settings for Resolution, Sving
Toner, and Toner Density.
System Settings Interface Settings Port, Parallel Setup, Serial Setup, USB
Setup Enable/Disable I/O ports
System Settings Storing/Calling of
System Settings Factory Defaults, Save Configuration,
Restore Configuration Save and Restore
Configuration are EWS only
features
Network Settings Quick Settings Network Names, DNS Settings, WINS
Settings, SMTP Settings Access to commonly used
network settings.
Left-Navigation
Item
Top Level Left-Navigation Item
Second Level Display Area Functions Comments