manualshive.com logo in svg

Sharp DX-B350P, User Manual, Page: 77 / 146

Share
Download
Sharp DX-B350P User Manual Download Page 77

6-1

Chapter 6: Embedded Web Server

This printer comes with an Embedded Web Server (EWS). 
The EWS resides in the printer and requires no installation. 
The EWS contains access to printer features and presents 
them as HTML web pages. The changes made via the EWS 
change the printer settings in the same manner as the 
Operator Panel. To change settings for specific documents, 
use your Printer Properties options within the driver.

NOTE:

If there is a conflict between settings in the Operator
Panel, Printing Preferences, or Embedded Web Server
and printer settings set via your application, the
application settings supersede any other setting.

Accessing the EWS

To access the embedded web server, you must be on an 
IP-based network and have access to a web browser. 

In your web browser, type the IP address assigned to the 
printer. For example http://192.0.0.1 for IPv4 or 

http://

[2001:0db8:85a3:08d3:1319:8a2e:0370:7348] for 
IPv6

.

In this Chapter...

•

Accessing the 

EWS

•

Navigating the 

EWS 

Summary of Contents for DX-B350P



















































































































































Reviews:

No comments