Sharp DX-B350P, User Manual

Page: 36 / 146

3-10 User’s Guide
Operator Panel Menus
Operator Panel
RTS On1/Off1 On/Off Off If On, the RTS signal will reflect the Online/
Offline status.
RTS Error On/Off Off If On, the RTS signal will reflect the Error
status.
XON Ready/Busy On/Off On If On, the XON response will reflect the
Ready/Busy status.
XON On1/Off1 On/Off On If On, the XON response will reflect the
Online/Offline status.
XON Error On/Off Off If On, the XON response will reflect the
Error status.
DTR Polarity High
Low High Polarity for DTR
RTS Polarity High
Low High Polarity for RTS
Robust XON On/Off Off Send Multiple XON codes.
Delay Out Close On/Off Off When ON, the printer will wait until the job
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
Binary PS On/Off On When On, the feature allows all binary codes
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
ETX/ACK On/Off Off
Network 1 Setup This submenu allows you to set up the
Network interface.
Interpreter Auto Switch
PCL
PostScript 3 Auto Switch
Format Raw
Normal
Binary Raw Configures how incoming print jobs are
scanned for special binary control codes.
RAW=no processing
Normal = “Adobe Standard Protocol” (ASP)
Binary = “Binary Control Protocol” (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
Menu Item Value Default Description