manualshive.com logo in svg

Sharp DX-B350P, User Manual, Page: 113 / 146

Share
Download
Sharp DX-B350P User Manual Download Page 113

User’s Guide

9-3

Poor Print Quality

Troubleshooting

Black spots are printed.

Is the correct type of paper used?

Load the correct type of paper. 

Is the Toner Cartridge defective or damaged?
Ensure that you are not printing outside the 
non printable area. This is within 4 mm of the 
paper edge

Replace it with a new Toner Cartridge.

Black streaks are printed.

Is the Toner Cartridge defective or damaged?

Replace it with a new Toner Cartridge. 

Dirt appears at equal 
intervals.

The feed route of the paper may be stained.

Print a few pages to remove the stains.

Is the Toner Cartridge defective or damaged?

Replace it with a new Toner Cartridge. 

Hair-like streaks are 
printed inside or outside 
the black halftone areas.

Are you using paper that has been left 
unwrapped for a long period of time 
(especially when the humidity is low)?

Replace with paper from a new ream.

Status

Items to check

Action

Summary of Contents for DX-B350P



















































































































































Reviews:

No comments