Sharp DX-B350P, User Manual

Page: 39 / 146

User’s Guide 3-13
Operator Panel Menus
Operator Panel
PS Menu
The PS menu allows you to Print PS Errors. Items available in this menu are described below
PCL Menu
The PCL menu allows to set a variety of PCL settings. Items available in this menu are
described below
Format Raw
Normal
Binary Raw Configures how incoming print jobs are
scanned for special binary control codes.
RAW=no processing
Normal = “Adobe Standard Protocol” (ASP)
Binary = “Binary Control Protocol” (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
Delay Out Close On/Off Off When ON, the printer will wait until the job
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
Binary PS On/Off On When On, the feature allows all binary codes
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
Parameter Value Default Description
Print PS Errors On/Off Off Choose to either print or not print PS errors.
Parameter Value Default Description
Orientation Portrait
Landscape Portrait Choose the orientation of the page.
Font Source Internal
User FLASH
Hard Disk
Compact Flash Internal Choose the source of the default font.
Font Number 0-158 50 Set the default font number.
Menu Item Value Default Description