Sharp AR-F151, Facsimile Operation Manual

Page: 26 / 77

INITIAL SETTINGS 2-16
Using the Remote Reception Function
or
FUNCTION
GHI
ABC
STOP STOP
The unit’s Remote Reception feature is designed to allow you to activate fax reception
from a telephone directly connected to the unit. The Remote Reception function
operates even when the FAX Signal Receive function is turned off. See “Setting Up the
Unit for Use with a PC Modem” on the previous page. When you hear the fax tone,
simply press the one-digit Fax Remote Number (Factory setting: 5) and . Follow the
two procedures below to use this feature.
Notes:
•
If the extension phone is connected in parallel, you cannot use the Remote Reception
function.
• If documents are set in the SPF, the unit does not answer when you press the Fax
Remote Number and . However, if the originals are set in the SPF as part of a copy
job in progress, the unit answers when you press the Fax Remote Number and .
• If you are not using a PC modem on the same line as your unit, and have not turned off
the Fax Signal Receive function, you do not need to make any changes to the Remote
Reception function. Simply use the factory settings. The unit will automatically take over
the line should you answer from the telephone directory connected to the unit and a fax
tone is detected.
• If you want to receive a fax while you are on an telephone directory connected to the
unit, when you hear a fax tone, press the one-digit Fax Remote Number and . To
ensure proper fax reception, hang up the extension phone only after you have
confirmed that fax reception has begun.
Turning on Remote Reception:
Factory setting: 1 (ON)
Step Press these keys Comments
1
“OPTION SETTING” will appear in
the display.
2
“REMOTE RECEPTION” will appear
in the display.
3
Press 1 to turn Remote Reception on,
or 2 to turn it off.
4
Press the STOP key twice to exit.
Fax Setup
02_INITAL.p65 3/22/00, 2:39 PM 16