manualshive.com logo in svg

Sharp AR-F151, Facsimile Operation Manual

Share
Download
Sharp AR-F151 Facsimile Operation Manual Download Page 43

HOW TO USE THE FAX FUNCTION

4-5

Auto Cover Sheet

If you want to send a cover sheet with your fax transmissions regularly, this function is
very useful. This function differs from the Cover Sheet function in two ways. First, the
Cover Sheet function must be programmed before every fax you want to use it with; the
Auto Cover Sheet function will send a cover sheet with every fax transmission unless
you turn it off. No message is included on the cover sheets generated by the Auto
Cover Sheet function. Please note that the Cover Sheet function is the dominant of the
two, so an ideal way to use the two together is to always leave Auto Cover Sheet on,
then use the Cover Sheet function to attach messages or not attach a
cover sheet to certain transmissions.

Use the procedure below to turn the Auto Cover Sheet function on or off:

Factory setting: 2 (OFF)

Step

Press these keys

Comments

1

“OPTION SETTING” will appear in
the display.

2

“AUTO COVER SHEET” will appear in
the display.

3

Press 1 to turn the function on, or 2 to
turn it off.

4

Press the STOP key twice to exit.

Note: The receiver's name must be programmed in either the Rapid Key or Speed Dial

function for it to appear on the Auto Cover Sheet.

FUNCTION

GHI

DEF

ABC

STOP

STOP

or

Sending Documents

04_THE FAX.p65

3/22/00, 2:39 PM

5

Summary of Contents for AR-F151














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands