Sharp AR-F151, Facsimile Operation Manual

Page: 39 / 77

HOW TO USE THE FAX FUNCTION 4-1
The stand alone fax component of your unit offers a range of sophisticated features
that allow you to control image quality, reception mode, broadcasting, polling, and
transmission priorities. Functions such as sending documents from memory and
substituting reception into memory are possible, due to the large memory capacity.
Sending Documents
Setting the Document
Original face up
4. HOW TO USE THE FAX FUNCTION
This section describes setting documents in the SPF or on the original table.
When Using the SPF:
1
Confirm that there are no
documents on the original table
and that copying is not in progress,
then gently close the original cover.
2
Adjust the document guides to the
width of your document.
3
Place the document face up and
push it gently into the document
feeder tray. The top edge of the
document should enter the fax first.
4
There are two ways to send the fax:
• To scan the document into memory,
then dial and transmit, continue with
the “Dialling and Transmitting”
section.
• To dial and transmit the document
directly without first scanning it into
memory, press the DOCUMENT key.
“DIRECT SEND” will appear in the
display. Continue with the “Dialling
and Transmitting” section.
04_THE FAX.p65 3/22/00, 2:39 PM 1