manualshive.com logo in svg

Sharp AR-F151, Facsimile Operation Manual

Share
Download
Sharp AR-F151 Facsimile Operation Manual Download Page 50

HOW TO USE THE FAX FUNCTION

4-12

You can choose whether or not to have a footer with the sending machine’s ID
information (name, number, etc.) printed out.

Factory setting: 2 (OFF)

Step

Press these keys

Comments

1

“OPTION SETTING” will appear in
the display.

2

“FOOTER PRINT” will appear in the
display.

3

Press 1 to print footers, or 2 to not
print them.

4

Press the STOP key twice to exit.

Footer Printing

FUNCTION

GHI

ABC

ABC

STOP

STOP

or

Optional Reception Settings

You need to use the SPEAKER key or an extension telephone to perform manual
sending and receiving. For information about connecting an extension telephone
see “Connecting Other Devices” in Chapter 1 for details.

1

When the extension telephone
rings, pick up the handset and
converse.
• If the SPEAKER key is used to

answer a call you cannot converse.

Note: You cannot use the SPEAKER key for fax transmission/reception while copying

is in progress.

2

When the handset is off hook or the
SPEAKER key is used, press the
FAX START key.
• When there are originals in the SPF,

the machine senses the presence of
the originals and displays the
message.
Press “1” to send. Press “2” to
receive.

MANUAL MODE
1:SEND  2:RECEIVE

When using manual sending and receiving

04_THE FAX.p65

3/22/00, 2:39 PM

12

Summary of Contents for AR-F151














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands