Sharp AR-F151, Facsimile Operation Manual

Page: 61 / 77

HOW TO USE THE FAX FUNCTION 4-23
To set a timer operation:
Step Press these keys Comments
1
“TIMER MODE” will appear in the
display.
2
Select SET. “TIMER COMM. #=1”,
“TIMER COMM. #=2” or “TIMER
COMM. #=3” will appear in the display.
3
Select “SEND MODE” or “POLLING
MODE”.
4
Enter the time of the operation (2
digits for the hour and 2 digits for the
minute).
5
Press “ ” to select A.M., or “#” to
select P.M.
6
Enter the code for the day of the
operation. If the operation will be
performed within 24 hours, just press
the ENTER key.
7
“ENTER NUMBER” will appear in the
display.
8
Enter the fax number of the other
machine using one of the following
methods:
• Press a Rapid key.
• Enter a Speed Dial number with the
number keys.
For a polling operation, go to Step 12.
9
“SET RESOLUTION & CONTRAST
THEN ENTER” will appear in the
display.
10
If this is a transmission operation,
adjust the resolution and/or contrast if
desired. (Otherwise, skip this step.)
11
“LOAD DOCUMENT(S)” will appear in
the display. If the document is already
loaded, no message will appear in the
display.
After loading the document, it is
scanned into memory. Then the
document can be sent at the time you
selected, or polling can be performed.
12
Press the STOP key a number of
times until you exit.
FUNCTION
or
DEF
ABC
or
ABC
JKL
ENTER
ENTER
ENTER
ENTER
RESOLUTION CONTRAST
ENTER
STOP STOP
or
. . .
Special Functions
(example)
(example)
(example)
(optional)
04_THE FAX.p65 3/22/00, 2:40 PM 23