Sharp AR-F151, Facsimile Operation Manual

Page: 62 / 77

HOW TO USE THE FAX FUNCTION 4-24
You can avoid wasting paper by using the Anti Junk Fax function. This function prevents
the reception of faxes from up to ten specified parties.
To turn the Anti Junk Fax feature on and off, use the following procedure:
Factory setting: 2 (OFF)
Step Press these keys Comments
1
“ANTI JUNK FAX” will appear in the
display.
2
“ANTI JUNK SELECT” will appear in
the display.
3
Turn Anti Junk Fax on or off.
4
Press the STOP key twice to exit.
To cancel a timer operation:
If you need to cancel a timer operation after it has been set, follow the steps below:
If the timer operation is a transmission operation, you will need to know the number
assigned to it. If you do not remember the number (it appears in the display when you
set the operation), print out the Timer List. See “Printing Out Reports” in this chapter for
details on how to print out the Timer List.
Step Press these keys Comments
1
“TIMER MODE” will appear in the
display.
2
Select “CLEAR”. “ENTER # (1-3)” will
appear in the display.
3
Enter the 1-digit number assigned to
the operation.
(example)
4
“CLEARED” will appear in the display.
5
Press the STOP key twice to exit.
FUNCTION
ABC
STOP STOP
ENTER
Anti Junk Fax
FUNCTION
ENTER
ABC
or
MNO
STOP
STOP
Special Functions
04_THE FAX.p65 3/22/00, 2:40 PM 24