Sharp AR-6020 Operation Manual Download Page 32

Page: 32 / 139

BEFORE USING THE MACHINE

USB 2.0 connector

Connect to your computer to use the printer and
scanner functions.

10BASE-T/100BASE-TX LAN connector

Connect to your network to use the printer and
scanner functions.

(p.14)

Document feeder tray (when the RSPF is
installed)

Place the original(s) that you wish to scan face up
here. Holds up to 100 originals.

(p.46)

Original guides (when the RSPF is installed)

Adjust to the size of the originals.

(p.45)

Feeding roller cover (when the RSPF is
installed)

Open to remove misfed originals.

(p.112)

Exit area (when the RSPF is installed)

Originals exit the machine here after copying.

Toner cartridge lock release lever

To replace the toner cartridge, pull out the toner
cartridge while pushing on this lever.

(p.119)

Toner cartridge

Contains toner.

(p.119)

Roller rotating knob

Turn to remove misfed paper.

(p.114, p.115)

Fusing unit release levers

To remove a paper misfeed from the fusing unit, push
down on these levers and remove the paper.

(p.115)

Photoconductive drum

Copy images are formed on the photoconductive
drum.

Fusing unit paper guide

Open to remove misfed paper.

(p.116)

The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.

The model name can be seen on the machines
front cover.

Warning

Note

Summary of Contents for AR-6020












































































































































Search results

Summary of Contents for AR-6020

Reviews:

Related manuals for AR-6020

Brands by name

Popular brands

Sharp AR-6020, Operation Manual

Search results

Summary of Contents for AR-6020

Reviews:

Related manuals for AR-6020

Brands by name

Popular brands