Sharp Actius PC-GP22W Operation Manual Download Page 113

Page: 113 / 124

rou
bleshoo

ting

T-6

•

Confirm the hard disk has sufficient free space.

Trouble with the SD/SmartMedia Cards

Question: Why can’t I use a SD card or a SmartMedia card?

•

Click

Safely Remove Hardware

icon (

) on the taskbar and confirm the string for

the SD card slot and SmartMedia card slot, shown by

Safely remove USB Mass

Storage Device- Drives (X:,X:)

appear. (X is a drive letter of the SD card slot or the

SmartMedia card slot.) If not, the devices are disabled. To enable them, restart the
computer.

Trouble with the CD/DVD

Question: Why does not the drive open?

•

Confirm the computer is turned on.

•

If the computer is turned off, insert a fine rod into the drive tray ejection hole.

Question: Why can’t I read data from a disk or play files?

•

Confirm the disk is inserted correctly.

•

Confirm the drive and file names are correct.

•

Confirm the disk is not stained or scratched.

•

Confirm the disk or files are supported.

Summary of Contents for Actius PC-GP22W





























































































































Search results

Summary of Contents for Actius PC-GP22W

Reviews:

Related manuals for Actius PC-GP22W

Brands by name

Popular brands

Sharp Actius PC-GP22W, Operation Manual

Search results

Summary of Contents for Actius PC-GP22W

Reviews:

Related manuals for Actius PC-GP22W

Brands by name

Popular brands