6-2
6
Entering and Exiting the Setup Utility
1.
Turn on the computer.
2. When
<F2> to enter
System Configuration Utility
appears, press
F2
. The Setup
Utility opens.
3.
Set the settings to the appropriate ones. Refer to the next section.
4. Select
Exit
menu; then press
Enter
.
5.
Select one of the exit methods, and press
Enter
.
6.
Confirm the message and press
Enter
again. The system restarts.
Changing the setting of the Setup Utility
To change the settings:
1. Use
→
or
←
key to select the menu; then press
Enter
.
2. Use
↑
or
↓
key to select the item.
If the item has or :
Press
Enter
to enable or disable the item. mark means the item is
enabled. Mark means disabled.
If the item has no mark (except
Date and Time
of
Main
menu and
Set Password
of
Security
menu):
1. Press
Enter
to open the sub menu.
2. Use Tab key to highlight the value; then use
↑
or
↓
key to select the
value. The value with
•
is being selected.
3. Use Tab key to highlight
OK
; then press
Enter
.
To set
Date and Time
:
1. Press
Enter
.
2. Use arrow keys to highlight the value; then use minus key or space bar to
change the value.
3. Use arrow keys to highlight OK; then press
Enter
.
To set
Set Password
: see
Security
Menu
in this chapter.
3.
Close the Setup Utility according to the steps above.
When the Setup Utility is opened, power management does not work. Do
not close the display cover.
Summary of Contents for Actius PC-GP22W
