Sharp Actius PC-GP22W Operation Manual Download

Page: 70 / 124

4-11

Printer

You can connect a printer to either of the parallel port or the USB port.

Before using a printer, read the printer manual and install the printer
driver.

Connecting to the Parallel Port

Turn off the computer and the printer.

Connect the computer and the printer with the printer cable. If the connector has
screws, tighten them.

Turn on the printer; then, computer.

Connecting to the USB Port

Be sure to read the printer manual before connecting the USB printer to
the computer. Some printer may not use

New Hardware Find

wizard to

install the printer driver.

You can connect the USB printer to the computer without turning off the computer.

Parallel Port

Screw

Printer Cable

USB Cable

USB Ports

Summary of Contents for Actius PC-GP22W





























































































































Search results

Summary of Contents for Actius PC-GP22W

Reviews:

Related manuals for Actius PC-GP22W

Brands by name

Popular brands

Sharp Actius PC-GP22W, Operation Manual

Search results

Summary of Contents for Actius PC-GP22W

Reviews:

Related manuals for Actius PC-GP22W

Brands by name

Popular brands