Sharp Actius PC-GP22W Operation Manual Download

Page: 33 / 124

2-10

If the dialog box asking you

What do you want Windows to do?

appears, select the

task you want.

The indicator status:

Light Meaning

Off (black and white)

No card in the slot or able to eject the card

On (colored)

Able to access the card (Never eject the card.)

Blinking (red)

Reading or writing the data from/into the card

(Never eject the card.)

Ejecting a SD Memory Card

•

Do not remove the card nor turn off the computer when the
indicator on the taskbar is green or blinking red. Otherwise, the SD
memory card or the data may be damaged.

•

Be sure to follow the instructions below when ejecting a SD memory
card. Otherwise, the system may not work properly.

1. Click

start

–

My computer

Right-click the icon of

SD/MMC

; then,

Eject

. The indicator on the taskbar

lights off.

Push the card into the computer until you hear the clicking sound. It pops out
slightly.

Confirm that the indicator lights off (black and white) before ejecting the
SD memory card.

Summary of Contents for Actius PC-GP22W





























































































































Search results

Summary of Contents for Actius PC-GP22W

Reviews:

Related manuals for Actius PC-GP22W

Brands by name

Popular brands

Sharp Actius PC-GP22W, Operation Manual

Search results

Summary of Contents for Actius PC-GP22W

Reviews:

Related manuals for Actius PC-GP22W

Brands by name

Popular brands