Sharp Actius PC-GP22W, Operation Manual

Page: 97 / 124

A-4
Appendixes
Uninstalling the Memory Module
1. Follow steps 1-2 of Installing the Memory Module and turn over the sheet.
2. Slightly bend the two latches outward until the memory module is released.
3. Remove the memory module and follow steps 5-8 of Installing the Memory
Module .
Maintenance and Care
This section provides you with information on how to maintain the computer in
excellent working condition.
Replacing Backup Battery
•
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the equipment
manufacturer.
•
Discard used batteries according to manufacturer’s instructions.
Your computer is equipped with a backup battery, which will keep the information of
the Setup Utility, etc safe. If you see the message
Press F1 to Continue, Del to Load
CMOS default , replace the backup battery with a new one. You can purchase a new
backup battery from your local dealer.
1.
Turn off the computer, and remove the AC adapter, the battery pack and
peripheral devices. See Chapter 3 for removing the battery.
Make sure to turn off your computer and remove the AC adapter and the
battery pack. Otherwise the computer may malfunction.