manualshive.com logo in svg

Sharp Actius PC-GP22W, Operation Manual

Share
Download
Sharp Actius PC-GP22W Operation Manual Download Page 32

 

2-9 

 

2 

Using the SD Card Slot 

 

 

Your computer is equipped with a SD card slot. Available card sizes are 16MB to 
512MB. Before inserting a SD memory card into the slot, refer to its manual.  
 

 

• 

You cannot read/write any copy-protected data from/into a SD memory 
card with built-in copyright protection technology compliant with the 
SDMI specification. 

• 

Never remove the  /  indicators from the taskbar. Otherwise, you 
may misjudge the timing in accessing/ejecting the card. 

• 

Make sure to log on the computer as a member of the Computer 
administrators group. Otherwise you cannot remove the card safely and 
correctly. 

 

Inserting a SD Memory Card 

 

 

• 

You can insert a SD memory card without turning off the computer. 

• 

Make sure to unlock the write protect switch on the SD memory card 
when you write data into the card. Refer to the manual of the SD 
memory card for more information about the write protect switch. 

 

Insert a SD memory card into the slot with the SD logo face up and the notched part 
backward until it locks into place. When the card inserted correctly, the   indicator 
on the taskbar turns to green and it is ready for reading or writing. 

 

   
  

 

Make sure to insert the card with the SD logo face up and the notched 
part backward. Otherwise, the card and the computer may be damaged.

 

 

SD Logo Facing Up 

SD Card Slot

Notched Part 

Summary of Contents for Actius PC-GP22W





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands