SEW-Eurodrive MM 03D-233-00, Compact Operating Instructions

Page: 52 / 80

6
Startup of MOVIMOT
®
with MLK.. in Easy mode
Description of the DIP switches S1
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
52
Motor with operating point 400 V/50 Hz and LSPM technology
Applies to MOVIMOT
®
with the following drive ID module:
Drive ID module Motor
Identification Identification
color
Part number Line voltage
V
Line frequency
Hz
DRU...J/400/50 Gray 28203194 230/400 50
Setting of DIP switch S1/6:
Power rating Motor type MOVIMOT
®
inverter MM..D-503-00
Motor in
W
connection Motor in m connection
kW S1/6 = OFF S1/6 = ON S1/6 = OFF S1/6 = ON
0.25 DR U 71SJ/.. – MM 03 D.. MM 03 D.. MM 05 D..
0.37 DR U 71MJ4/.. MM 03 D.. MM 05 D.. MM 05 D.. MM 07 D..
0.55 DR U 80SJ4/.. MM 05 D.. MM 07 D.. MM 07 D.. MM 11 D..
0.75 DR U 80MJ4/.. MM 07 D.. MM 11 D.. MM 11 D.. MM 15 D..
1.1 DR U 90MJ4/.. MM 11 D.. MM 15 D.. MM 15 D.. MM 22 D..
1.5 DR U 90LJ4/.. MM 15 D.. MM 22 D.. MM 22 D.. MM 30 D..
2.2 DR U 100MJ4/.. MM 22 D.. MM 30 D.. MM 30 D.. MM 40 D..
3.0 DR U 100LJ4/.. MM 30 D.. MM 40 D.. MM 40 D.. –
6.5.4 DIP switch S1/7
Setting the maximum PWM frequency
• When DIP switch S1/7 is set to "OFF", the MOVIMOT
®
works with the PWM fre-
quency of 4 kHz.
• When DIP switch S1/7 is set to "ON", the MOVIMOT
®
works with the PWM fre-
quency of 16 kHz (low-noise). MOVIMOT
®
incrementally switches back to lower
clock frequencies depending on the heat sink temperature and the load on the in-
verter.
6.5.5 DIP switch S1/8
No-load vibration damping
When setting DIP switch S1/8 to "ON", this function reduces resonance vibrations
when in no-load operation.
27792307/EN – 07/2022