5
Electrical installation
PC/laptop connection
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
41
5.10
PC/laptop connection
MOVIMOT
®
drives are equipped with an X50 diagnostic interface (RJ10 plug con-
nector) for startup, parameterization and service.
The diagnostic interface [1] is located underneath the screw plug on top of the
MOVIMOT
®
inverter.
You must remove the screw plug before plugging the connector into the diagnostic in-
terface.
CAUTION!
The ensured degree of protection will be lost if the screw plug of the di-
agnostic interface X50 is not installed. Damage to the MOVIMOT
®
drive.
If a screw plug is not screwed into the diagnostic interface, you must ensure that no
moisture or dust can penetrate the MOVIMOT
®
drive.
WARNING!
Risk of burns due to hot surfaces of the MOVIMOT
®
drive (especially
the heat sink). Severe injuries.
Wait for the MOVIMOT
®
drive to cool down sufficiently before touching it.
The diagnostic interface is connected to a commercially available PC/laptop with one
of the following interface adapters [2] with a USB interface:
MOVIMOT
RJ10
[1]
USB
[2]
PC/Laptop
®
1 min
18014398968268043
[1]
Diagnostic interface
[2]
Interface adapter
Scope of delivery:
•
Interface adapter
•
Cable with RJ10 plug connector
•
USB interface cable
The following interface adapters are available:
Designation
Part number
USM21A
28231449
USB11A
08248311
27792307/EN – 07/2022
