1
4
R..7, F..7, K..7, S..7, Spiroplan
®
W Gear Units – Operating Instructions
Important Notes
1
Important Notes
Safety and
warning notes
Please note the safety and warning notes in this publication!
Close adherence to the Operating Instructions is the prerequisite for fault-free operation
and fulfillment of any rights to claim under guarantee. Please start reading the Operating
Instructions prior to operating the drive!
Keep Operating Instructions in vicinity of unit since it contains important informtion on
service procedures.
Disposal
(please observe the most current regulations):
•
Dispose of housing parts, gears, shafts and anti-friction bearing of gear units as stell
scrap. The same applies to gray cast iron parts unless there is separate collection
service.
•
Some worm gears are made of non-ferrous metals and must be disposed of
accordingly.
•
Collect waste oil and dispose according to local guidelines.
Electrical hazard
Could result in: death or severe injuries.
Imminent danger
Could result in: death or severe injuries.
Dangerous situation
Could result in: slight or minor injuries.
Damaging situation
Could result in: damage of drive and operating environment.
Operating hints and useful information.
•
Adjust lubricant fill amount and position of breather valve when changing
mounting position (see section "Lubricants" and "Mounting Positions").
•
Please see notes in section "Setup" / "Setup of Gear Unit!"
Changes to edition 04/2000 are indicated by gray bars in the margin
Summary of Contents for F 27 Series
Page 2: ...SEW EURODRIVE...
