39
The
Real-Time
Values
screen shows current readings to verify the system is configured properly. The
tables display the real-time values of Volts, Amps, KW, KVA, KVAR, apparent power factor (aPF), and
displacement power factor (dPF) for Phase L1, Phase L2 and Phase L3. This screen also displays the
current Data/Digital Scalar value used for each element, the CT Type connected to the Power Patrol, and
the CT Value.
Click
Update
to retrieve the values from the Power Patrol.
-or-
Select the
Auto-Update
checkbox to automatically update approximately every 20 seconds.
U
SING
R
EAL
-T
IME
V
ALUES TO
V
ERIFY
S
ETUP
Values displayed for Volts, Amps, KW, etc., should make sense, meaning the values in the table are
relevant for the service being measured. This indicates the Power Patrol setup is correct.
It may also be useful to use a handheld amp meter to test the current and compare its readings to the
values provided on the
Real-Time Values
screen.
