33
6)
Click
Connect
to connect HeadStart with the Power Patrol. The
Status
field informs you of the
connection process. When the connection is complete, the
Device Info
fields display Serial Number
and Firmware Version of the Power Patrol meter.
NOTE:
If HeadStart was installed first, it needs to be restarted following a RS-485 driver installation. If a
RS-485 port does not appear in the drop-down list, the RS-485 was not installed correctly.
S
ETTING
E
THERNET
C
OMMUNICATION
P
ARAMETERS
1)
Select Ethernet (TCP/IP) to gather information via a network connection. When selected, the
Communications Setup screen changes and an IP Address is required.
2)
Select Modbus or BACnet as your communication protocol.
3)
Enter the IP Address for the Ethernet connection of the meter or select one of the previously used
addresses from the drop-down list.
The
Scan Network
button scans the network for possible meters. The Logger Selection dialog
box displays.
4)
Select the correct device from the list of IP Addresses.
5)
Click Setup. The Logger Network Setup dialog box displays, below.
The
Setup
button displays the Logger Network Setup dialog box where network address
information is entered.
See your network administrator before making changes.