26
Ethernet (TCP/IP) Connection
1)
Select
Ethernet
(TCP/IP) to gather information via a network connection. When selected, the
Communications Setup screen changes and an
IP Address
is required.
2)
Select your mode of communication.
3)
Enter the
IP Address
for the Ethernet connection of the meter or select one of the previously used
addresses from the drop-down list. See
About IP Addresses
.
-or-
Use the
Scan Network
or
Setup
buttons to acquire a new IP Address. See
About IP Addresses
.
4)
Enter the
Port
connected to the Power Patrol meter. A checkbox is available to make the port the
default. Different networks may require different ports.
See your network administrator.
5)
Click Connect. Status box will show a connected status.
