12
SESAMO
DUALCORE
CARRIAGES COMMISSIONING
Fix the belt clamps part. N fig.5 to the carriages using the screws provided and match them
with the positions indicated in fig.5 for 1 or 2 leaves.
Adjust the anti-derailment device part. E fig.9 by operating on the appropriate screw part. D
fig.9 so that the roller is not in contact with the aluminum profile during sliding, maintaining
a play of 0.5-1 mm fig.9a. Tighten screw D fig.9 without affecting the adjustment.
Check that all the screws on the carriages are correctly tightened.
DANGER: lose screws on the carriages can come undone allowing parts to become
detached, causing the leaves to fall or the belt to come off, leading to the leaf being out of
control when in movement and presenting a serious risk of injury.
WARNING: incorrect adjustment of the anti-derailing device that leaves the wheel in
contact with the aluminum profile causes excessive wear and noise during operation.
DOOR LIMIT SWITCH ADJUSTMENT
Position the limit switches of the leaves as shown in fig. 5 making sure that in the case of two
leaves the central limit switch acts only on the right leaf and the opening limit switch on the
left leaf:
-
place the special rubber fig. 13 part. B on the side of the bracket part. A in contact
with the carriage
-
adjust the position of bracket A by loosening screws C and sliding the nuts into the
appropriate channel
-
when the limit switches are in the desired position, tighten screws C firmly
DANGER: before operating the automated system, check that the screws of the limit
switches are tightened properly part.C fig.13 fig.13
Summary of Contents for DUALCORE LH100
