39
SESAMO
DUALCORE
Installation with basic selector for LH100/LH140 versions
Logic selection
: to select the logics described below, press the desired logic button. The LED
will remain on and steady confirming the acquisition.
1 Stop closed:
the doors remain permanently open. If installed, the electric lock blocks the
doors.
2 Stop open
: the doors remain permanently open
3 Reduced opening:
the door operates in reduced opening mode. The factory setting
corresponds to 50% of the passageway, a value that can be changed during installation or
later. Function 3 can be combined with functions 2/4/5
4 Only Exit
: the door operates only in exit mode. If installed, the electric lock locks the doors
every time they arrive in the closed position.
5 Entry and Exit
: the door operates in entry and exit mode. If installed, the electric lock does
not block the doors.
PR Opening button:
controls the opening of the door - in the second function it can be used by
technical personnel for parameter adjustments.
ESC Manual opening:
the door works only by using the PR button - in the second function it
can be used by technical personnel for parameter adjustments
.
Reset:
press for a few seconds in case of door failure. If the door does not work properly,
request technical assistance.
Battery Signal Led:
if on and steady, it indicates the absence of mains power and the
consequent battery operation of the automated system. If on and flashing, it indicates that the
battery charge level is insufficient. In this case, if the LED does not go off after a few hours, the
batteries must be replaced; request technical assistance.
Summary of Contents for DUALCORE LH100
