Sesamo DUALCORE LH100, Installation Manual

Page: 25 / 73

25
SESAMO DUALCORE
Sb YES NO YES YES
SC YES YES NO NO
Sd YES YES NO YES
SE YES YES YES NO
SF YES YES YES YES
NOTE: YES/NO indicates whether an active safety device with the test function in compliance
with EN16005 has been detected in the input.
7- the flashing F. code indicates that the LS cannot terminate because one or more of
the inputs of the safety devices are active instead of at rest; use the table below to
identify the inputs from the code on the display:
Report Safe Open 2 Safe Open 1 Safe Close 2 Safe Close 1
F1 On break On break On break Active
F2 On break On break Active On break
F3 On break On break Active Active
F4 On break Active On break On break
F5 On break Active On break Active
F6 On break Active Active On break
F7 On break Active Active Active
F8 Active On break On break On break
F9 Active On break On break Active
FA Active On break Active On break
Fb Active On break Active Active
FC Active Active On break On break
Fd Active Active On break Active
FE Active Active Active On break
FF Active Active Active Active
note the error code, press ESC to exit the LS procedure and look for the cause of the error
on the individual input from the following possible errors:
- polarity setting error of supervised inputs/outputs
- setting error logic values NO/NC of the inputs or outputs of the safety circuit of the
sensors
- presence of persons or objects in the detection field of one of the safety sensors
- hardware malfunction of one of the components