38
SESAMO
DUALCORE
As an additional safety, the automated system is equipped with a sophisticated
microprocessor device which limits the thrust force of the leaves in case of danger, so as not to
represent a source of hazard for people in transit.
For safety reasons even in the absence of a mains power supply and battery, the automated
system is designed so that it is always possible to manually move the leaves after unlocking the
door locking device with the appropriate key if installed.
Installation with advanced selector for LH100/LH140 versions
1
Logic selector
: in order to select the logics described below, press the SET key several times
until the LED flashes on the desired function. After a few seconds, the LED will remain on
steady confirming the acquisition.
2 Entry and Exit
: the door operates in entry and exit mode. If installed, the electric lock does
not block the doors.
3 Exit Only
: the door operates only in exit mode. If installed, the electric lock locks the doors
every time they arrive in the closed position.
4 Reduced opening:
the door operates in reduced opening mode. The factory setting
corresponds to 50% of the passageway, a value that can be changed during installation or
later. Function 4 can be combined with functions 2/3/5
5 Stop open:
the doors remain permanently open
6 Manual Opening:
the door works only by using button 8
7 Stop closed:
the doors remain permanently open. If installed, the electric lock blocks the
doors.
8 Opening button:
controls the opening of the doors
9/10/11
Functions menu for schedule setting or for adjustments. See dedicated manual
12 Reset:
press for a few seconds in case of door failure. If the door does not work properly,
request technical assistance.
Summary of Contents for DUALCORE LH100
