selection of a user profile
automatically at power on after a configured time delay
selecting Connector Protection from the
Options
menu
To enable Connector Protector:
1. Press
Menu
then select
Options > Settings > Connector Protection
.
2. To toggle protection on/off press the
Toggle
context key. When the
CP
Enable
check box is ticked, Connector Protector is enabled, and when the
check box is empty it is disabled.
If Connector Protector is enabled (
) when the radio is powered
off
, it will
remain enabled when the radio is next powered
on
unless the radio is in a
charger or car kit or if a data accessory (e.g. programming lead) is attached
when the radio is powered
on
, in which case Connection Protector is disabled
(
) until the radio is removed from the charger, car kit or data accessory. In
these circumstances it is not necessary to re-enable Connector Protector.
Tip:
If the ‘water drop’ icon (
) is displayed on a radio, the radio cannot
be programmed.
User profiles
User profiles are pre-set combinations of alerts and settings on your radio.
They allow you to switch settings easily to match your circumstances or
environment. An icon
showing the number of the profile selected,
appears on the status line or the Shortcut Bar. Up to ten pre-defined user
profiles may be configured for your radio. Example user profiles could be
Normal
,
Lone Worker
and
Covert
.
To change the user profile:
1. From the Home screen, press the
Groups
context key 3 times (
User
Profiles
).
2. Use the navigation keys or the
Navi-knob
to scroll through the user
profiles.
3. Press the
Select
context key to activate the selected user profile.
User Guide
107
