Power on
To power
on
, press and hold (2 seconds) the
Cancel/Home
key.
Your radio attaches to the last selected talkgroup when it was powered off (if
it is 'in service').
Depending on your radio's customisation any of the following may display:
the percentage of charge remaining, if a Sepura battery is fitted
a Sepura logo
a splash screen
a welcome screen
a PIN entry screen
Note:
A message may be displayed relating to the authenticity of your
battery or attached accessory. A message may appear if your software
licence has or is about to expire.
Note:
If your radio supports
Radio User Assignment
(RUA), which
authenticates your radio on the network, you may be prompted to log on
to your network. See
Note:
Transmitting in 3W RF is only available when using a Sepura 3W
battery. During power on the radio checks the authenticity of the battery
and whether it has the capacity for the radio to transmit 3W RF. A
message displays and the power may be limited if the radio cannot
transmit in 3W RF when licensed to do so.
Power off
Note: Do not
power
off
the radio by removing the battery. The radio
must be powered
off
correctly to ensure that it performs a controlled
'powered down'.
To power
off
, from the Home screen press and hold (4 seconds) the
Cancel/Home
key.
User Guide
23
