8 Finalizing the configuration
8.1 Make the settings persistent
If the user has consistently pressed Save when the pop up shown below has appeared on
the screen, all settings will be persistent and will be applied again when the device powered
on.
Figure 8-1:
Save to Boot pop up
If the user is not sure all settings have been stored, the procedure below is to be executed.
1. Click on the
Admin/Configurations
tab
2. Select Current in the Source drop down box as shown in Figure 23.
Figure 8-2:
Select Current as Source
3. Select Boot in the Target drop down box as shown in Figure 8-3
Figure 8-3:
Select Boot as Target
35
