4.7. CONNECT TO THE WEB INTERFACE
4.7 Connect to the Web Interface
Any device with Wi-Fi can connect to the Altus NR2 and use the Web Interface.
The Altus NR2 identifies itself as wireless network or an access point by default.
Before
starting the procedure below, it is advised to get acquainted with the procedure of your
device (phone, tablet, computer) for connecting to a Wi-Fi network.
1. Ensure the Altus NR2 is fully booted (about
1 minute
).
2. Ensure the Wi-Fi is enabled on the Altus NR2 as described in Section 4.6.
3. Using your preferred device, select the Wi-Fi application and find the wireless network
called APS-NR2-<Serial Number>.
4. The default password is empty.
5. Open a browser and type the default IP
192.168.20.1
in the address bar
6. The browser will land on the ‘Overview’ tab of the Altus NR2 Web Interface.
Figure 4-2:
Web Interface Overview Tab
23
