7 Set the Antenna Height
The antenna height is the offset between the measured point and the Antenna Reference
Point. Practically this is the height of the survey rod.
The Altus NR2 automatically compensates for the Antenna Phase Centre using the
approved calibration of the product in order to provide the most accurate position out of
the box.
1. Click on the
GNSS/Status
tab and enter in an antenna height.
2. Click Apply when finished. In the example shown in Figure 7-1, an offset of 2 meters
was used.
Figure 7-1:
GNSS Tab: setting Antenna Offset
34
