Sensor Electronics Corporation
Page 18 of 66
SEC 3500 OI
5500 Lincoln Drive
Supervisor Operator’s
Minneapolis, Minnesota 55436
Manual
September 29
th
, 2006
952-938-9486
Version
2.1.0095
6.2 Setting the Alarm and Relay Parameters
When the “Set Alarms” button is pressed on the “Sensor Details” Screen as shown in
section 6.0, the “Change Alarm Levels” Screen will appear if the Supervisor is logged in.
Please note that only this SEC 3100 Gas Transmitter and SEC 3000 Sensor are
com
e user to the associated
con
he remaining navigation buttons will transition to the various Sensor configuration
screens in the “scoped” Modbus mode: meaning that only this specific SEC 3100 device
b ing communicated with, and no other on the bus during configuration. A warning
ill appear indicating this mode, flashing underneath the Screen Title at the bottom-left
arm Levels” Sensor configuration screen,
operation can be returned to normal by pressing the “Sensor Details” button, shown
above. On any of the other Sensor configuration screens, this same button, titled “Alarm
Levels” returns the user to the “Change Alarm Levels” Screen (the screen shown above).
municated with when on this set of screens. This Screen forms the “Parent” screen
for a group of configuration screens as outlined in the special navigation panel to the left
of the screen as show below:
The navigation panel is present on all of the Sensor Configuration Screens, with the
same screen navigation buttons in the same locations. The bottom-left title bar contains
the current screen name as shown above: “Change Alarm Levels”. Pressing any of the
navigation buttons in the navigation panel will transport th
figuration screen while in Supervisor mode (Supervisor logged in). Pressing the
“Calibrate” button will transition the system to the SEC 3100/3000 Sensor Calibration
Process as described in section 6.1, and transitions exactly as it would if pressed from the
“Sensor Details” screen.
T
is e
w
corner of the screen. On the “Change Al
Summary of Contents for SEC 3000
