Sensor Electronics SEC 3000, Instruction And Operation Manual

Page: 47 / 489

Part Number 3100-EXP-MANUAL
REV 11 20141007
Time Date Menu
Entering this menu will allow the operator to set the time and date of the SEC 3100 real time clock.
Selecting Enter will locate a cursor (*) above the number allowing the operator to use the Up Down arrows
to increase or decrease the numbers. Once the correct number is displayed, select Enter with the magnet
and the cursor will advance to the next number.
Date is MM/DD/YYYY. Time is HH/MM/SS. Below is an example.
Enter from above display.
Arrow Up one number.
Enter
Continue with the sequence until the correct date appears. Then select Enter and the following will be
displayed.
At this point the operator can advance to setting the correct time using the Down Arrow.
Time numbers are changed using the procedure as the Date numbers. Once the correct Time is
programmed, select Enter and arrow down to Exit.
SELF TEST
* DATE TIME
* DATE 1 / 30 / 2006
TIME
EXIT
*
* DATE 1 / 30 / 2006
TIME
EXIT
*
* DATE 2 / 30 / 2006
TIME
EXIT
*
* DATE 2 / 30 / 2006
TIME
EXIT
* DATE 2 / 15 / 2006
TIME
EXIT
DATE
* TIME 14 : 33 : 04
EXIT
DATE
TIME
* EXIT