SELVA MARINE DOLPHIN 15, Service Manual

Page: 94 / 398

INSP
ADJ
CONTROL SYSTEM
CONTROL SYSTEM
Throttle cables adjustment
1. Check:
9
Throttle cables
Damage
→
Replace.
Excessive slack or the stoppers donot
contact each other
→
Adjust.
2. Adjust:
9
Throttle cables
E
Adjustment steps:
8
Put the shift lever into the forward
position.
8
Turn the throttle grip to the fully-
opened position.
8
Loosen the locknut
1
and adjust the
length of the accelerator cable
2
with
the adjusting nut
3
until the upper
stopper
4
on the throttle control cam
contacts the stopper
5
on the throttle
control cam bracket.
8
Tighten the locknut.
8
Turn the throttle grip to the fully-
closed position.
8
Loosen the locknut
6
and adjust the
decelerator cable
7
with the adjusting
nut
8
until the lower stopper
9
on
the throttle control cam contacts the
stopper
5
on the throttle control cam
bracket.
8
Tighten the locknut.
8
Fully open and close the throttle grip
and make sure the upper stopper con-
tacts the bracket stopper (at the fully-
open position) and the lower stopper
contacts the bracket stopper (at the
fully-closed position). If proper con-
tact is not made, repeat the above pro-
cedure.
3-3