Alyseo 106
SELTA S.p.A
.
All rights reserved. No parts of this document can be reproduced, memorized into archive system or transmitted
in any shape or through any means without the previous authorization of SELTA S.p.A.
Configuration Interface
4-25
Alyseo 106 User Manual
720041008-A0-GB Issue 4
Add route ip dest 10.0.2.0 netmask dest 255.255.255.0 gateway 192.168.10.10
In this way, we have configured the path for the destination address 10.0.2.0 subnet
255.255.255.0 and output gateway 192.168.10.10 (output interface towards customer’s network).
By means of the “show" command of cntrl menu, it is always possible to evaluate the current
control configuration of Alyseo106.
The destination address can be that of a single host (ex. 10.0.2.17), and in this case the netmask
must be of 32 bit (255.255.255.255), or a subnet identified by a destination address where a
subnet of 10.0.2.0 type with netmask 255.255.255.0 is specified.
4.5.2.11 “configure CF” menu
The Application CF choice allows accessing to the configuration of Cell Forwarding.
Alyseo106# configure CF
Alyseo106 configure >
shdsl SHDSL link parameter
cf-pvc Create or modify cross-connect for CF
cntrl Access control
show Show running configuration
commit Active configuration
done Done configuration
The typical characteristics of the applications are described here below, while for what not
explicitly said, the IWF rules.
4.5.2.11.1 Addition of entries in the table of ATM switch
Alyseo106 configure > cf-pvc
Alyseo106 cf conf >
VP Add virtual path: <vpi-Shdsl> <vpi-E1> <pcr> <class>
VC Add virtual circuit: <vpi-Shdsl> <vci-Shdsl> <vpi-E1> <vci-E1> <pcr> <class>
delete Delete a PVC
adminstatus Change administrative status
CAC Connection Admission Control
Band_dsl Set CAC upper bound
E1-port Port ITU-T G.703
show Show CF configuration
done Done Cell Forwarding cross-connect configuration
Alyseo106 cf conf > VP 1 1 2304 cbr
Summary of Contents for Alyseo 106
Page 1: ...User Manual Alyseo 106 ...
