Alyseo 106
SELTA S.p.A
.
All rights reserved. No parts of this document can be reproduced, memorized into archive system or transmitted
in any shape or through any means without the previous authorization of SELTA S.p.A.
Configuration Interface
4-13
Alyseo 106 User Manual
720041008-A0-GB Issue 4
Ex:
Alyseo106 shdsl conf >mode (‘?’)
co Central Office
cp Customers Premises
Alyseo106 shdsl conf >mode co
Mode CO: Central Office
CLI confirms the executed configuration, in this case "Mode Central Office".
Ex:
Alyseo106 shdsl conf >rate1
192-2304 ( Kb/s ) rate1=n*64 n=3,..,36
Alyseo106 shdsl conf >rate1 2048
Rate1: 2048 Kb/s
Finally, CTRL-D or "done" to come back to upper level.
4.5.2.10.2 Frame Relay
The commands available at this level are:
Alyseo106 configure > frame_relay (‘?’)
Alyseo106 fr conf > (‘?’)
port
configure Frame Relay port
endpoint
configure Frame Relay End Point Usage: endpoint <dlci>
lmi
LMI (Local Management Interface) parameter
no
Negate a configuration item
show
Show Frame Relay Configuration
done
Done Frame Relay configuration
As regards the FR layer, the parameters of the physical port can be modified, the endpoints can
be added (each one with a determinate value of DLCI) and the LMI parameters can be modified.
Port
Typing "port", the level changes and the available commands are:
Alyseo106 fr port conf > (‘?’)
service target service
name port name
loop_framerelay protocol loop forced
Summary of Contents for Alyseo 106
Page 1: ...User Manual Alyseo 106 ...
